Properties

◆ flow measurement of free flowing solids from 10 ~ 80 m³ per hour

◆ measurement nearly unaffected by grain size and bulk density 
◆ excellent repeatability and accuracy 
◆ factory pre calibration possible 
◆ very low maintenance

Option

◆  Wear protection for heavy abrasive materials: Hardox
◆  Profibus interface
◆  MOD-Bus interface
◆  counting impulses / 4-20mA analogue output
◆  lower or higher flow rate with Baby-FlowSlide or Maxi-FlowSlide

Description

Inside the FlowSlide meter the product is running over a special curved slide. The product is generating a centripetal force directly proportional to the flow rate. Due to the special force transmission into the load cell, the measurement is almost unaffected by product density, grain size and friction. The FlowSlide system can be pre calibrated at factory.

Specification

Enclosure  : Aluminium, product exposed parts in stainless steel

Model    :                                    10                    25                 50                 80

Measuring range  :                    10  m3/hr          25  m3/hr       50   m3/hr      80   m3/hr

Demension : 700(H) x 526(D)  x 310 mm          x 470 mm       x 760 mm       x 1,120 mm

Supply Voltage  : via FlowSlide device, 5VDC clock circuited

Sensor : - full bridge strain gauge
              - combined error 0.03%
              - protection class IP68, optional ATEX

Operating Conditions and Material Property
outside operating temperature -10°C up to +55°C noncondensing the products should be free flowing and not tend to stick

Accuracy  : dependant on work environment and installation conditions typical

                     system accuracy  +/-  0.5% of measuring range

                     repeatability: +/- 0.2 %

Cleansing  : compressed-air connection for energization and cyclic cleaning

Electronic FlowSlide Unit

Enclosure : stainless steel, protection class IP67 wall or panel mounting

Control Unit  : membrane keyboard, numeric and function keys

Input  : full bridge strain gauge optional transistor input channel

Optional Output  : analogue output 4-20mA counting impulses transistor output channel Profibus,

                               ModBus TCP as slave

Operating Conditions  : operation temperature  -10°C  up to +40°C.

Dimensions : 265 x 204 x 69mm (excl. clamp)

Weight : 2.95kg

Display : colour display including trenddisplay kg/h, Σ kg (3 counters), Fault message on display

Supply Voltage : 110-240VAC with 50-60Hz or 12-28 VDC

User Language  : German, English, Spanish, Russian, Turkish